HC21ZE123 - Fits Carrier Bryant Payne Furnace Exhaust Draft Inducer Motor

(No reviews yet) Write a Review
  • HC21ZE123 - Fits Carrier Bryant Payne Furnace Exhaust Draft Inducer Motor
$54.95

Description

  

HC21ZE123 - Carrier Bryant Payne Furnace Exhaust Draft Inducer Motor

This is a brand new ClimaTek Furnace Draft Inducer Motor Assembly. It is designed to work with Carrier Bryant Payne Furnaces. It is rated at 115 volt and 3000 RPM. Designed to replace the part numbers listed below:
An inducer motor is designed to expel the exhaust gas from the furnace. Older inefficient furnaces allowed the flue gas to escape the unit with virtually no resistance. Newer high efficient furnace heat exchangers are so restrictive that the flue gases cannot exit the furnace though “natural draft”. Therefore, the inducer is required to pull the flue gases through the heat exchanger. The inducer motor is usually the first thing that starts up when your furnace calls for heat.


Replaces:
HC21ZE123 
 
Repair Difficulty Level
new-banner-2019-rounded.png
new-logo-opaque.png

Partial list of Model numbers that use this part.
 

Use the Ctrl+F and enter your model number for a quick search.

 

 

 

View AllClose